Arthobby.com
This glider was specially engineered for slope and hand launch enthusiasts. Is very light constructed rigid high performance 1.5-meter slope glider. Its light flying mass and composite fuselage construction makes it very rugged. The MH32/30 modified thin airfoil was specially designed to allow superb air penetration, very wide range of speed and excellent handling.
Skua will fly in light breeze as well in winds reaching 40+ MPH and with added ballast (750 grams flying weigh) it shows it's real potential.
Skua is an excellent sloper due to its toughness and very good flying and handling characteristics.
Kit contains:
model components, all necessary hardware, drawing and step by step instructions.
6 CH. or more
6 CH. or more
2 ea. HS-65HB; HS-5065HB or similar
1-2 ea. HS-45HB,HS5045HB or similar
650-750mAh - NiMh, LiPo
Skua will fly in light breeze as well in winds reaching 40+ MPH and with added ballast (750 grams flying weigh) it shows it's real potential.
Skua is an excellent sloper due to its toughness and very good flying and handling characteristics.
Kit contains:
model components, all necessary hardware, drawing and step by step instructions.
Wing span
Length
Glider weight
Wing area
Wing airfoil
Length
Glider weight
Wing area
Wing airfoil
1500 mm / 59 in.
985 mm / 38.8 in.
235 g / 8.2 oz.
22 dm² / 341 sq.in.
MH32/30-modified
985 mm / 38.8 in.
235 g / 8.2 oz.
22 dm² / 341 sq.in.
MH32/30-modified
Recommended
Radio
Receiver
Ailerons servos
Elevator/Rudder
Battery
Radio
Receiver
Ailerons servos
Elevator/Rudder
Battery
6 CH. or more
6 CH. or more
2 ea. HS-65HB; HS-5065HB or similar
1-2 ea. HS-45HB,HS5045HB or similar
650-750mAh - NiMh, LiPo
Recommended Accessories
Replacement Parts






